Floor Type Boring and Milling Machine


High Productivity
Spindle continuously monitored to provide most efficient cutting conditions.
Each axis is independently controlled to provide maximum feed as required.

High Power Spindle
Variable speed and high torque are a function of the 22kw AC motor (30 min. rating).
For the spindle bearings, super precision, highly rigid tapered roller bearings are employed. These bearings ensure high precision and high rigidity of the spindle with minimal heat generation. The machine is equipped with a cooling device for the lubricant inside the headstock.
The spindle nose is a 7/24 taper No. 50.

High Positioning Accuracy through CAD designed rib casting.
For the vertical travel of headstock, the spindle travel and the quill feed, high quality ball screws are used. All sliding surfaces are automatically lubricated at key points.
The clamps for headstock vertical travel, column cross traverse, and quill travel are heavy-duty hydraulic type.
The major structural members are box-shaped with best possible arrangements of ribs with a large cross-sectional area, providing highest rigidity long-term accuracy and precision.

High Precision Slideways
The column and bed slide ways are hardened and ground. The mating surfaces of the moving units are coated with a special fluorine resin, and forced-lubricated so that the system for slide ways offers minimum friction resulting in high precision which will be maintained over a long period of time, this ensures a very smooth feed stroke even at low speeds without stick/slip.

Ease of Operation
The switches on the pendant control box have the most efficient layouts for working respectively. This ensures improved operating efficiency.
The contents of programs and the current positions are displayed on the CRT display. This enables to make preparation and checking of the programs easily.
The CBM-110F series features the high performance manual operation mode added to its highly capable NC mode operation mode, thus offering almost any mach ining capability you would expect of the system of this category.
Using the portable operation control box allows the work to be adjusted to be centered, and permits manual cutting operation.

Rotary Table
The bed slide way is hardened and ground, and equipped with an automatic lubricating system. This creates good abrasion-resistance and long working life.
NC-controlled, the saddle feed (V-axis) is driven by high-precision ball screw to provide high precise positioning capability.
With the rotation of the rotary-table indexed to every 90 degrees controlled by the M-command, the positioning pin provides high precision indexing. The digital read-out counter is standard equipment calibrated to 1 minute.
The use of B-axis Numerical Control as the optional specification is recommended. This enables high-precision desired indexing for each 0.001 degree and rotational milling.


Boring Spindle

Rotary Table

Model Unit CBM-110F
Spindle Main Motor(30min/Cont) kw (hp) AC18/22 (24/29)
Spindle Speed rpm/min 5-2500
Spindle Taper   ISO-50/BT-50
Spindle Diameter mm (in) Ø110 (4.33)
Max. Spindle Torque Nm (kgm) (ft·lbs) 1245(127)
Max. Spindle Thrust N (kgf) (ft·lbf) 19600 (2000)
Travel Column Travel X axis (Horizontal) mm (in)
mm (in)
2000-6000 : Ball screw
Above 6000 : Rack
Spindle Vertical Travel Y axis mm (in) 2000(79)/2500(98)/3000 (118)
W Axis (Spindle Travel) mm (in) 600 (23.62)
Feedrate Rapid Feed X/Y axis mm/min (in/min) 6000 (236)
V/W axis mm/min (in/min) 4000 (157)

* Electric power capacity:85KVA


Floor Type Boring & Milling Machine CBM-110F