Horizontal Boring Milling Machine(Centrally-mounted spindle)


High Productivity
The AC digital wrap around spindle drive and motor are more accurate and responsive than traditional analog spindle drives and motors.
The spindle performance is continuously monitored to provide the most efficient cutting conditions. Each axis is independently controlled to provide maximum feed as required.

Powerful Spindle
The specially designed spindle outer ring cooling system maintains constant bearing accuracy under normal operating conditions.
This gear type auto-shift design and grease lubrication system also provides superior machine performance and reliability.
The spindle and boring bar are made of SACM645 alloy. The spindle has been Nitrided to HRC62~68. This hardness maintains spindle form and insures high reliability. This increased rigidity increases the overall machine capability.
We use the very highest quality spindle bearings from SKF and NSK. These high quality bearings insure machine consistency and a longer machine life.

CBA Series Box Ways
These highly rigid box way structures give you the very best machine durability. The material is high-frequency-heat-treat for stress relief.
The 4-in-1 design for CBA-110R and CBA-110R2 bed slide ways enhance the cutting capabilities in the Z-axis.

Ease of Operation
Fanuc, Siemens, and Heidenhain control panels are available options. These value added features will enhance your working capability, efficiency, and much more.
We are sure that you will be very satisfied with the high level of quality and improved machine performance.

High Precision Slide Ways
Our auto grease lubricating system provides several advantages for the overall machine capability.
It not only maintains high accuracy during the long working hours, but also functions perfectly with low speed machining. The high precision ball screw axis transmission provides superior machine stability resulting in highly accurate work pieces.
The CBA-110R3 provides 2 additional linear slide ways to enhance durability and eliminate unwanted deflection. This significantly improves machine cutting accuracy

Rotary Table
This special combination of highly rigid box ways, ball screws, and worm gear automatic lubrication system provides a highly satisfying compact rotary table design. With the Heidenhain angle encoder installed in the rotary table center shaft, combined with our specially designed hydraulic clamping system and positioning index pins, our machines can achieve any cutting angle. Reinforced heavy cutting angles at 0°, 90°, 180°, and 270° are included features. Hence resulting in superior accuracy and cutting efficiency.

Spindle (Front view)

Centrally-mounted spindle、Y axis - Twin servo motors


Model Unit MH-110R2 MH-110R3
Spindle Main Motor(30min/Cont) kw Standard : 18/22kw / Optional : 22/26kw
Spindle Speed (Max.) rpm Standard : 2500 / Optional : 4000 * (for W: 400mm only)
Spindle Taper   ISO 50 / BT-50
Spindle Diameter mm Ø 110
Spindle End Diameter mm Ø 215
Max. Spindle Torque Nm 18/22kw : 760 / 22/26kw : 910
Travel Work Table Travel X axis(Horizontal) mm 2000 3000
Spindle Travel Y axis(Vertical) mm 1600 2000
Work Table Travel Z axis(Vertical) mm 1300 1500
Spindle Travel W axis mm Standard : 400 / Optional : 600
Distance from spindle nose to table center mm 723~2023 723~2223
Distance from spindle center to table surface mm 0~1600 0~20000
Rotary Table Table Dimension mm 1400x1600 1600x1800
T-Slot mm x No. 22x9 22x9
Max. Loading Weight kg 8500 10000
Index degree 0.001° 0.001°
Max. Rotation Diameter mm 2126 2408
Table Rotation Speed rpm 0.8 0.8
Feed Rapid Feed XYZW axis mm/min XYZ axis=10000 / W axis=3000
Feed Rate X / Y axis mm/min 1-5000
Feed Rate Z / W axis mm/min 1-5000
Power Capacity KVA 100 100
Machine Dimension (L×W×H) mm 5365x8560x4450 6350x8560x4845
Machine Weight Kg 29000 32000
Controller   Fanuc / Siemens / Heidenhain


Standard accessories
  • Tool and Tool Box
  • Foundation Screws and pads
  • Spindle Oil Cooler
  • Working Lamp
  • Electrical Cabinet Cooler
  • X axis Dust Cover
  • Y axis Dust Cover
  • Z axis Dust Cover
  • MPG (Manual Pause Generator)
  • Automatic Lubrication System
  • Screw Chip Conveyor
  • Steel Belt Chip Conveyor (with cart)
Optional accessories
  • ATC (Automatic Tool Changer )
  • Coolant Through Spindle
  • Linear Scale
  • Spindle Support
  • Facing head
  • Transformer
  • Splash Guard For Rotary Table
  • Splash Guard For Operator
  • Workpiece Measuring Device

Facing Head FH-500

U axis travel : 160mm

Max. Speed : 220rpm

Spindle Support

Length : 220

Length : 300

Angular Milling Head

Spindle Rotation Speed : 1000 rpm(無段)

Model : A50

Spindle Tapper : ISO No.50

Max. Cutter Diameter : 8 inch

Max. Cutter Torque : 588 Nm (60kgf-m)

Universal Milling Head

Spindle Tapper : 3~200 rpm(無段)

Model : U50

Spindle Tapper : ISO No.50

Max. Cutter Diameter : 8 inch

Max. Cutter Torque : 490 Nm (50kgf-m)

Automatic Tool Changer

Tool capacity : 24 / 32 / 40 / 60

Tool shank : MAS 403 BT-50

Pull stud : MAS 403 P-50T-I

Tool weight : 25 kg

Max. tool length : 300 mm

Max. tool diameter : Ø 125 mm (Ø250mm)